Elevator Air Condition

TKF-25Y split elevator air conditioner parmeter :

Rated Cool Capaticy (W )	2500W
Air Flow (m3/h )	480 (high wind ) / 360 (low wind ) m 3 /h
Rated Input Current (A )	4.7A
Rated Input power (W )	1015w
Voltage/Frequency	220V - 50Hz
Noise dB (A )	Main unit ＜ 55 dB (A )	subsidiary ＜ 50 dB (A )
Dimensions (L*W*H ) mm	Main machine	subsidiary
	450*310*395 (mm)	556*238*235(mm )
Air out Opening Size	435* 45mm
Return Air Opening Size	ф 200mm circular hole or 620mm perimeter ellipse
Weight (kg )	Main machine 31.5 (Kg )	subsidiary 15.5 m (Kg )
For Elevator (kg )	≤ 1350kg

Brief Installing introduction:
1 ． the main machine of the elevator air conditioner are installed on the upper beam of the elevator or fix by the rack to the upper beam.
2 ． open an 200mm hole on the elevator car top for returning air.
3 ． Tear off the original fan, heat insulating dealing to the car top interlayer, fix the subsidiary to the fan opening.
4 ． lead the core of the remote receiving probe to car and fix it ;
5 ． connect the copper pipe,condensate water pipe and electricity wire between the major machine and the subsidiary ;
6 ． screw open the adjust vavle, discharge the air in the pipe and screw tight it ;
7 ． Connect the power supply, use remote controller to set the running mode of “program control”, the air conditioner goes into auto running mode.